Redway Power · LiFePO4 battery factory for OEM & wholesale, 12V to 100V|Tel +86 189 7608 1534|Get a quick quote

Choosing a Rack Battery

Rack batteries are specified by the system around them: inverter, voltage and the depth of discharge the site

Request a specification

Rack batteries are specified by the system around them: inverter, voltage and the depth of discharge the site actually needs.

Voltage and capacity follow the inverter

A 48V/51.2V rack module is the default for hybrid inverters; the amp-hours then follow the backup window you need, not the shelf label.

Cells, BMS and what the spec sheet hides

Ask which cell and which BMS, then how the manufacturer tests them. The voltage curve and the cycling protocol decide the real service life.

Where the price differences come from

The gap between two-looking-identical rack batteries is usually cell grade, BMS headroom and how the cabinet is wired.

Rack battery questions

The questions that come before an order.

What voltage are rack batteries?

Most home and small-commercial racks use 48V nominal (51.2V) modules, because that is what hybrid inverters expect. Higher-voltage industrial racks step up to 100V, 200V or more.

How many rack modules do I need?

Size from the backup window and the load: multiply the average load by the hours you want to cover, then add a margin. Lithium lets you use most of the rated capacity, unlike lead-acid.

Can I parallel rack batteries of different ages?

Only with the same model, firmware and ideally the same batch. Mixing ages unbalances the strings and the BMS will spend its life correcting.

What should I check before ordering a rack battery?

Cell grade and BMS model, the inverter compatibility list and firmware, the cabinet busbar rating, and whether the documentation matches the claims.

How long do rack batteries last?

Expect 6,000 cycles at 80% depth of discharge from a good LFP rack — around ten years of daily cycling. Temperature and the discharge depth decide the real number.

Send the system details

Tell us the inverter, the backup window and the site conditions, and we will confirm the pack and the wiring.

Request a specification

Search products
Product has been added to your cart