Redway Power · LiFePO4 battery factory for OEM & wholesale, 12V to 100V|Tel +86 189 7608 1534|Get a quick quote

Battery Voltage Guide (12V to 72V)

What each voltage step is for, and when stepping up pays for itself.

Ask a technical question

What each voltage step is for, and when stepping up pays for itself.

12V, 24V, 36V, 48V, 60V and 72V — what each is for

Small loads stay at 12V; vans and light traction sit at 24V; storage and most traction at 48V; scooters and high-draw tools step up to 60V and 72V.

Series and parallel: how packs reach a voltage

Series raises voltage, parallel raises capacity — and both change what the BMS has to manage.

Voltage & sizing questions

The questions that come before an order.

What voltage should I choose for a lithium battery?

It is set by the equipment: 12V for small loads and vehicles, 24V for light traction and vans, 48V (51.2V) for storage and most traction, higher for industrial systems. Match the device first, then choose amp-hours.

How do I work out runtime from amp-hours?

Multiply amp-hours by the nominal voltage for watt-hours, then divide by the actual load in watts. A 48V 100Ah pack is about 4.8kWh, which at 500W is roughly nine hours.

Is a higher voltage always better?

No. Higher voltage means lower current and thinner cable, but it also changes the charger, the BMS and often the whole system. Step up only when the equipment or the cable run demands it.

What does C-rate mean?

The current expressed relative to capacity: 1C on a 100Ah battery is 100A. Discharging faster than the cell rating shortens life and usually trips the BMS.

Why is a 12V lithium battery labelled 12.8V?

Because LiFePO4 cells are 3.2V nominal, so four in series give 12.8V. Equipment designed for 12V lead-acid accepts that range without modification.

All Redway guides · Ask a technical question

Search products
Product has been added to your cart