Redway Power · LiFePO4 battery factory for OEM & wholesale, 12V to 100V|Tel +86 189 7608 1534|Get a quick quote

Runtime Calculations in Practice

Working through two real examples step by step.

Ask a technical question

Working through two real examples step by step.

A solar storage example

Night load of 4kWh over 12 hours with two days autonomy gives roughly 10kWh of pack.

A traction example

A traction pack is sized by shift current, not by energy: current first, then amp-hours.

Voltage & sizing questions

Short answers to the ones that come up most.

How do I choose a voltage?

Set by the equipment — 12V small loads, 24V light traction, 48V storage and traction.

How do I work out runtime?

Ah x nominal V = Wh, divided by real load, minus 10–15% losses.

Why 12.8V instead of 12V?

Four 3.2V LFP cells in series.

What is C-rate?

Current relative to capacity — 1C on 100Ah is 100A.

Can I series different batteries?

No — same model, capacity and age.

Back to Charging & BMS · All Redway guides

Search products
Product has been added to your cart