Redway Power · LiFePO4 battery factory for OEM & wholesale, 12V to 100V|Tel +86 189 7608 1534|Get a quick quote

Alternator & DC-DC Charging

Charging a house bank while driving without cooking the alternator.

Ask a technical question

Charging a house bank while driving without cooking the alternator.

Why alternators need a DC-DC charger

A lithium bank pulls more current than the alternator was designed for; a DC-DC charger caps it and applies the right profile.

Sizing and installation

Size the DC-DC unit to the alternator’s spare capacity, then cable and fuse it like any other high-current feed.

Charging & BMS questions

Short answers to the ones that come up most.

What charger does a lithium battery need?

One with a lithium (LiFePO4) profile matching the pack voltage and BMS protocol. A lead-acid charger overcharges the pack and the BMS keeps disconnecting it.

What does a BMS protect against?

Over- and under-voltage, over-current, short circuit and temperature extremes, plus cell balancing. It cannot add capacity or repair a weak cell.

What voltage should I charge to?

3.45–3.65V per cell — about 14.2V for a 12V pack or 56.8V for a 48V pack.

Can I charge below freezing?

Not without a heater. Discharge in the cold is fine; charging below 0°C permanently damages the cells.

How do I know the charger matches the battery?

Check voltage, current limit and protocol. If the charger cannot read the BMS, it will eventually over- or under-charge the pack.

Back to Charging & BMS · All Redway guides

Search products
Product has been added to your cart