Redway Power · LiFePO4 battery factory for OEM & wholesale, 12V to 100V|Tel +86 189 7608 1534|Get a quick quote

BMS Communication Protocols

CAN, RS485, UART and why the inverter has to understand them.

Ask a technical question

CAN, RS485, UART and why the inverter has to understand them.

Protocols and what they carry

The protocol carries limits, state of charge and faults; without it the inverter guesses.

Matching BMS to inverter or charger

Check the compatibility list and the firmware version before ordering, not after.

Charging & BMS questions

Short answers to the ones that come up most.

What charger does a lithium battery need?

One with a lithium profile matching the pack voltage and BMS protocol.

What does a BMS protect against?

Over- and under-voltage, over-current, short circuit and temperature, plus cell balancing.

What voltage should I charge to?

3.45–3.65V per cell — about 14.2V for 12V packs, 56.8V for 48V packs.

Can I charge below freezing?

Not without a heater — charging below 0°C damages the cells.

How do I know the charger matches?

Voltage, current limit and protocol. If it cannot read the BMS, it will eventually mis-charge the pack.

Back to Charging & BMS · All Redway guides

Search products
Product has been added to your cart