What to do when a pack sits for months, and how to bring it back.
Storage state of charge and environment
Store at about half charge in a cool dry place, and disconnect the loads.
- What Is an Eco Charger and How Does It Benefit the Environment
- How Does Battery Storage Enhance EV Charging Stations
- Can I leave a trickle charger on my battery all winter
- Can lifepo4 batteries be stored at full charge
- LiFePO4 batteries working time, storage, fire hazard, charger and more
Reviving and rebalancing a long-idle pack
A pack left flat may recover with a slow top-up and a balancing cycle — or may not. Check the balance before trusting it.
Charging & BMS questions
Short answers to the ones that come up most.
What charger does a lithium battery need?
One with a lithium (LiFePO4) profile matching the pack voltage and BMS protocol. A lead-acid charger overcharges the pack and the BMS keeps disconnecting it.
What does a BMS protect against?
Over- and under-voltage, over-current, short circuit and temperature extremes, plus cell balancing. It cannot add capacity or repair a weak cell.
What voltage should I charge to?
3.45–3.65V per cell — about 14.2V for a 12V pack or 56.8V for a 48V pack.
Can I charge below freezing?
Not without a heater. Discharge in the cold is fine; charging below 0°C permanently damages the cells.
How do I know the charger matches the battery?
Check voltage, current limit and protocol. If the charger cannot read the BMS, it will eventually over- or under-charge the pack.
