Redway Power · LiFePO4 battery factory for OEM & wholesale, 12V to 100V|Tel +86 189 7608 1534|Get a quick quote

Sizing a Battery for Your Application

The same arithmetic, applied to boats, RVs, carts, homes and vehicles.

Ask a technical question

The same arithmetic, applied to boats, RVs, carts, homes and vehicles.

Sizing for solar, storage and off-grid

Size from the night load and the recharge window, not from the array rating.

Sizing for carts, boats and vehicles

For traction the question is range and draw; for marine it is trolling hours plus house loads.

Voltage & sizing questions

The questions that come before an order.

What voltage should I choose for a lithium battery?

It is set by the equipment: 12V for small loads and vehicles, 24V for light traction and vans, 48V (51.2V) for storage and most traction, higher for industrial systems. Match the device first, then choose amp-hours.

How do I work out runtime from amp-hours?

Multiply amp-hours by the nominal voltage for watt-hours, then divide by the actual load in watts. A 48V 100Ah pack is about 4.8kWh, which at 500W is roughly nine hours.

Is a higher voltage always better?

No. Higher voltage means lower current and thinner cable, but it also changes the charger, the BMS and often the whole system. Step up only when the equipment or the cable run demands it.

What does C-rate mean?

The current expressed relative to capacity: 1C on a 100Ah battery is 100A. Discharging faster than the cell rating shortens life and usually trips the BMS.

Why is a 12V lithium battery labelled 12.8V?

Because LiFePO4 cells are 3.2V nominal, so four in series give 12.8V. Equipment designed for 12V lead-acid accepts that range without modification.

All Redway guides · Ask a technical question

Search products
Product has been added to your cart