The H2.0-3.5FT brochure details lithium-ion forklift batteries ranging from 24V to 48V, optimized for Class II/III equipment. Key specs include energy density (140-160 Wh/kg), cycle life (4,000+ at 80% DoD), and compatibility with brands like Toyota and Crown. Safety certifications (UL, CE) and charging protocols (CCCV at 0.5C) are highlighted, alongside maintenance guidelines and 5-year warranty terms.Forklift Lithium Battery Category
What technical specs define the H2.0-3.5FT series?
The brochure specifies voltage ranges (24V–48V), capacities (200Ah–600Ah), and discharge rates up to 3C. Thermal stability thresholds (-20°C to 60°C) and IP67 ingress protection ensure rugged performance in warehouses. Pro Tip: Always verify voltage compatibility with your forklift’s motor controller to prevent premature wear.
For example, the 48V 400Ah model delivers 19.2kWh, powering 1.5-ton forklifts for 8–10 hours. Technical tables compare energy density across chemistries—LiFePO4 outperforms lead-acid by 300% in cycle life. Beyond raw numbers, the brochure clarifies BMS integration for load balancing and fault detection. Why does this matter? A mismatched BMS can’t prevent cell over-discharge, shortening lifespan. Transitional design features like bolt-on terminals simplify installation versus soldered connectors.
Wholesale lithium golf cart batteries with 10-year life? Check here.
| Spec | H2.0-3.5FT | Lead-Acid Equivalent |
|---|---|---|
| Cycle Life | 4,000+ | 1,200 |
| Charge Time | 2 hrs | 8–10 hrs |
How does the brochure address safety compliance?
UL 2580 and IEC 62619 certifications confirm thermal runaway prevention through cell spacing and flame-retardant casing. Overcurrent protection (250A cutoff) and self-diagnostic BMS protocols are documented. Pro Tip: Audit forklift battery compartments quarterly—poor ventilation increases thermal stress by 40%.
Real-world testing data shows the H2.0-3.5FT maintains <95°F surface temps under 3C loads, critical for cold storage facilities. Transitional sections explain how IP67 rating blocks dust in lumber yards. But what if a cell fails? The BMS isolates faults within 0.1 seconds, preventing cascading damage. Comparative tables highlight safety gaps in uncertified alternatives:
Want OEM lithium forklift batteries at wholesale prices? Check here.
| Feature | H2.0-3.5FT | Generic Li-ion |
|---|---|---|
| Cell Spacing | 3mm | 1mm |
| Flame Retardant | Yes | No |
What charging guidelines are provided?
The brochure mandates CCCV charging at 0.5C max, with temperature cutoffs at 113°F. Adaptive algorithms recover 95% capacity in 1.5 hours without voltage spikes. Pro Tip: Use CAN-enabled chargers—they sync with the BMS to adjust rates based on cell aging.
For instance, a 48V 600Ah pack charges from 20% to 80% in 45 minutes using a 300A charger. Transitional warnings clarify that partial charging (50–80%) extends cycles by 25% versus full DoD. Ever wonder why temperature matters? Charging below 32°F triggers lithium plating, permanently reducing capacity by 15% per incident.
Redway Battery Expert Insight
FAQs
Yes, but retrofit kits are required for terminal adapters and voltage calibration. Always check motor controller compatibility—48V systems need 50A+ continuous support.
What’s the warranty coverage?
5 years or 4,000 cycles (whichever comes first), excluding physical damage or improper charging. Register online within 30 days to activate full terms.
48V 400Ah/420Ah Forklift Lithium Battery
